1/8 4WD OFF-ROAD SUPER LIGHT BRUSHLESS ROCK RACER

Based on the BX8 SL platform, the DB8 is the “desert buggy” version, designed for dust and bashing driving in any condition, an insane brushless power delivery by the Konect 2750kv combine with the 80Amps SCT waterproof esc. This is a just “pure fun” car with impressive performance. The aggressive look of the body Schell protect the whole car against crashes, sand and dust.
The DB8SL is available with or without Lipo battery and charger.
Get ready for a new experience unlike any other rc vehicle.

Height : 175 mm
Wheelbase : 322 mm
Front width : 306 mm
Rear width : 310 mm
Front ride height : 54 mm
Rear ride height : 56 mm
Weight : 2330 gr

Transmitter Konect 2.4Ghz KN-KT2S-PLUS/SET

CH1 and CH2 reverse servo
CH1 (steering) ATV (dual rate) setting potentiometer
CH1 and CH2 Trim setting potentiometer
Electronic EPA (End Point Adjustment) setting for CH1 and CH2
Weight : 300g

Receiver KT2S + 2 channels
Dimensions : 38×23.5x14mm
Weight : 8g

Brushless Konect ESC 80A Waterproof KN-8BL80-SCT-WP

Specific SL cars Brushless ESC: Short Course/Truck/Monster Truck
Sensorless brushless motors capable
Continue current : 80 Amp
Burst current : 520 Amp
Resistance : 0.0010 Ω
Max motor limit : 5000Kv (2S) and 3000Kv (3S)
NiMh input : 5 to 9 cells
LiPo input : 2 or 3 cells (max 11.1V)
BEC : 6v or 7.4v /3A
Dimensions : 49×39.5×34.7mm
Weight : 105g
Over-heat protection
Programmable with Program Card (not included)
DEAN plug

Brushless Motor Konect KN-3660-2750 2750 Kv

10.8V Ni-MH and 2-3S Li-Po capable
Dimensions : Φ=36mm – L=60mm
Shaft : Φ=5mm – L=18.5mm
Resistance : 0,0083 Ω
Poles: 4
Amp : 2.8A
Weight: 247 g

Steering Servo Konect KN-1714

Case: plastic
Dimensions: 40.7×20.5×39.5mm
Weight: 62g
Torque (6.0V): 17kg-cm/ Speed (6.0V): :0.14s
Gears: metallic

Inside the box, Ready To Run version:

• 1/8th DB88SL buggy RTR version with stickered body
• KT2S+ radio system
• «LIPO220» 2/3S Li-Po charger
• Li-Po KONECT battery 3S1P 3600mAh 11.1V 1P 30C
• Instruction manual

Not included :
LR6 (AA) batteries (4 pcs)
R/C specifics tools

Inside the box, without battery and charger version:

• 1/8th DB8SL buggy with stickered body
• KT2S+ radio system
• Instruction manual

Not included :
LR6 (AA) batteries (4 pcs)
LiPo 2S 7.4V or 3S 11.1V battery
Battery matching charger
R/C specifics tools