1/10 4WD BRUSHLESS MONSTER TRUCK XL SIZE LIMITED EDITION

[widget id="polylang-2"]
The BXR.MT is a new 1 / 10th XL Monster Truck platform with unmatched power on the market!
The platform incorporates the technical characteristics of the BXR.S1 with the addition of many reinforced parts:
Front and rear wishbone, aluminum front and rear shock mount, aluminum cell reinforcements, aluminum reinforcement bar mount, all mounted on new Monster 132 x 57mm tires.
Out of its box, the vehicle is delivered with front and rear metal pinion differentials as well as an adjustable central slipper, high volume shock absorbers entirely in aluminum and “CVD” type universal joints at the front complete a transmission made up of cardan shafts. steel and fully mounted on bearings.
An aluminum frame and side splash guards allow the vehicle to withstand all racing conditions. Powered by a 50Amp waterproof drive and 3250kv brushless motor for maximum power and top speed.
WARNING: This vehicle is a monster of power!

 

Here is its new “Limited Edition” version for the 20th anniversary of the brand, at an exceptional price!

All aluminum parts are black anodized and logoed, and in addition to the initial version we have also included the 4 aluminum triangle axle shims instead of the plastic.

This vehicle is only available in Full RTR version (USB charger and 7.4V 3600mAh Li-Po battery).
We also slightly reduced the power of the motor, passing the motorization to 3250Kv.

Dimensions

Height : 204 mm
Wheelbase : 285 mm
Front width : 312 mm
Rear width : 318 mm
Front ride height : 61 mm
Rear ride height : 64 mm
Weight : 2295 gr

Transmitter Konect 2.4Ghz KN-KT2S-PLUS/SET

CH1 and CH2 reverse servo
CH1 (steering) ATV (dual rate) setting potentiometer
CH1 and CH2 Trim setting potentiometer
Electronic EPA (End Point Adjustment) setting for CH1 and CH2
Weight : 300g

Receiver KT2S + 2 channels
Dimensions : 38×23.5x14mm
Weight : 8g

Brushless 1/10 Motor Konect KN-3652SL-3250 3250 Kv

10.8V Ni-MH and 2-3S Li-Po capable
Dimensions : Φ=36mm – L=52mm
Shaft : Φ=3.175mm – L=15mm
Resistance : 0,0085 Ω
Poles: 4
Amp : 4.2A
Weight: 199 g

Brushless Konect ESC 50A Waterproof KN-10BL50-WP

Specific 1/10 cars Brushless ESC
Sensorless brushless motors capable
Continue current : 50 Amp
Burst current : 300 Amp
Resistance : 0.0010 Ω
Max motor limit : 5500Kv (2S) and 3500Kv (3S)
NiMh input : 5 to 9 cells
LiPo input : 2 or 3 cells (max 11.1V)
BEC : 6v/3 Amp
Dimensions : 48.5x38x32mm
Weight : 90g
Over-heat protection
Programmable with Program Card (not included)
DEAN plug

Steering Servo Konect KN-1714

Case: plastic
Dimensions: 40.7×20.5×39.5mm
Weight: 62g
Torque (6.0V): 17kg-cm/ Speed (6.0V): :0.14s
Gears: metallic

Inside the box, without battery and charger version:

• 1/10th XL BXR.MT. Monster with stickered body
• KT2S+ radio system
• Instruction manual

Not included :

LR6 (AA) batteries (4 pcs)
R/C specifics tools

 

 CHARACTERISTICS :

• Very Large Volume shock absorbers entirely in aluminum
• Special Monster Big foot tires
• Front and rear steel pinion differentials
• Front and rear anti-roll bar
• Reinforced lower triangulation
• 4mm CNC aluminum front and rear shock mounts
• Front and rear CNC aluminum cell reinforcements
• 3mm XL aluminum frame with plastic side protectors
• Entirely mounted on ball bearings
• New reinforced adjustable central slipper 3S
• Protection of central ring gear and secure motor pinion
• 2.4GHz radio system / adjustable limit switch
• 4-pole 3250Kv brushless motor size 3652
• 50Amp waterproof KONECT brushless dimmer “by HOBBYWING”
• Steering servo 7kg metal gears
• Water resistant receiving box
• Special Monster bodywork aggressive look
• Aluminum front / rear triangle axle support shims