[widget id="polylang-2"]<!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --><style><!-- [et_pb_line_break_holder] --> li{<!-- [et_pb_line_break_holder] --> list-style-type:none;<!-- [et_pb_line_break_holder] --> }<!-- [et_pb_line_break_holder] --> #polylang-2 ul{<!-- [et_pb_line_break_holder] --> display:flex;<!-- [et_pb_line_break_holder] --> justify-content:flex-end;<!-- [et_pb_line_break_holder] --> }<!-- [et_pb_line_break_holder] --> #polylang-2 img{<!-- [et_pb_line_break_holder] --> height : 20px;<!-- [et_pb_line_break_holder] --> width : 29px;<!-- [et_pb_line_break_holder] --></style>
This totally new innovative design has been developed for 3 years to reduce at the maximum the weight of the car keeping the 1/8 scale size and durability . We have continuously improved the performances of the platform to be able to use a lighter electronic system: smaller esc, smaller motor and lighter battery.
We save more than 1kg compare to a standard 1/8 buggy size equipped with electronic components.
With its 3660 size brushless motor and 2 or 3S battery, the sensation on the track is similar than a standard racing buggy with a very important cost saving, a price less than 400€ for a complete car including Lipo 3S and battery. This is just the future !
The BX8SL is available with or without Lipo battery and charger.
<iframe width="1920" height="1080" src="https://www.youtube.com/embed/Jy_-7VORpaI?ecver=1&autoplay=1&mute=1&loop=1&playlist=Jy_-7VORpaI" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>


Height : 175 mm
Wheelbase : 322 mm
Front width : 306 mm
Rear width : 310 mm
Front ride height : 54 mm
Rear ride height : 56 mm
Weight : 2330 gr

Transmitter Konect 2.4Ghz KN-KT2S-PLUS/SET

CH1 and CH2 reverse servo
CH1 (steering) ATV (dual rate) setting potentiometer
CH1 and CH2 Trim setting potentiometer
Electronic EPA (End Point Adjustment) setting for CH1 and CH2
Weight : 300g

Receiver KT2S + 2 channels
Dimensions : 38×23.5x14mm
Weight : 8g

Brushless Konect ESC 80A Waterproof KN-8BL80-SCT-WP

Specific SL cars Brushless ESC: Short Course/Truck/Monster Truck
Sensorless brushless motors capable
Continue current : 80 Amp
Burst current : 520 Amp
Resistance : 0.0010 Ω
Max motor limit : 5000Kv (2S) and 3000Kv (3S)
NiMh input : 5 to 9 cells
LiPo input : 2 or 3 cells (max 11.1V)
BEC : 6v or 7.4v /3A
Dimensions : 49×39.5×34.7mm
Weight : 105g
Over-heat protection
Programmable with Program Card (not included)
DEAN plug

Brushless Motor Konect KN-3660-2750

2750 Kv
10.8V Ni-MH and 2-3S Li-Po capable
Dimensions : Φ=36mm – L=60mm
Shaft : Φ=5mm – L=18.5mm
Resistance : 0,0083 Ω
Poles: 4
Amp : 2.8A
Weight: 247 g

Steering Servo Konect KN-1714

Case: plastic
Dimensions: 40.7×20.5×39.5mm
Weight: 62g
Torque (6.0V): 17kg-cm/ Speed (6.0V): :0.14s
Gears: metallic

Inside the box, Ready To Run version :

• 1/8th BX8SL buggy RTR version with stickered body
• KT2S+ radio system
• «LIPO220» 2/3S Li-Po charger
• Li-Po KONECT battery 3S1P 3600mAh 11.1V 1P 30C
• Instruction manual

Not included :
LR6 (AA) batteries (4 pcs)
R/C specifics tools

Inside the box, without battery and charger version:

• 1/8th BX8SL buggy with stickered body
• KT2S+ radio system
• Instruction manual

Not included :
LR6 (AA) batteries (4 pcs)
LiPo 2S 7.4V or 3S 11.1V battery
Battery matching charger
R/C specifics tools

<iframe width="1920" height="1000" src="https://www.youtube.com/embed/A3Jl8xzPU1s?ecver=1&autoplay=1&mute=1&loop=1&playlist=A3Jl8xzPU1s" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>