1/10 4WD BRUSHLESS OFF-ROAD READY TO RUN RACE ROLLER

  • English
  • Français

Our new BXR-S1 is a totally new platform, its chassis structure has been thought and designed to be capable to compete at the pro level.

When we designed this new car, we were thinking « how to make a 1/8 scale resistant buggy layout into a smaller scale? ». The BXR-S1 is this result.

And, as you can see, it is very similar to the current 1/8th buggy’s setting-up.

Disclosing from the box, a front and rear differential and an adjustable center slipper equipped with big bore fully aluminium shocks, steel front CVD’s and steel dog bones transmission.

A strong aluminium chassis and high racing sides guards guarantee the car a very high durability. A waterproof 50Amp esc and a high speed sensorless 3652 4600kv provide to the car an incredible speed potential. We even include a Lipo 2200 7,4V battery and charger. Just add 4pcs AA batteries for the transmiter and race it !

Simply the best RTR brushless car in the market !

Dimensions

Height : 148 mm
Wheelbase : 273 mm
Front width : 248 mm
Rear width : 248 mm
Front ride height : 48 mm
Rear ride height : 48 mm
Weight : 1625 g.

Transmitter Konect 2.4Ghz KN-KT2S-PLUS/SET

CH1 and CH2 reverse servo
CH1 (steering) ATV (dual rate) setting potentiometer
CH1 and CH2 Trim setting potentiometer
Electronic EPA (End Point Adjustment) setting for CH1 and CH2
Weight : 300g

Receiver KT2S + 2 channels
Dimensions : 38×23.5x14mm
Weight : 8g

Brushless Konect ESC 50A Waterproof KN-10BL50-WP

Specific 1/10 cars Brushless ESC
Sensorless brushless motors capable
Continue current : 50 Amp
Burst current : 300 Amp
Resistance : 0.0010 Ω
Max motor limit : 5500Kv (2S) and 3500Kv (3S)
NiMh input : 5 to 9 cells
LiPo input : 2 or 3 cells (max 11.1V)
BEC : 6v/3 Amp
Dimensions : 48.5x38x32mm
Weight : 90g
Over-heat protection
Programmable with Program Card (not included)
DEAN plug

Brushless 1/10 Motor Konect KN-3652SL-4600 4600 Kv

8.4V Ni-MH and 2S Li-Po capable
Dimensions : Φ=36mm – L=52mm
Shaft : Φ=3.175mm – L=15mm
Resistance : 0,0059 Ω
Poles: 4
Amp : 3,9A
Weight: 200 g

Steering Servo Konect KN-0420

Case: plastic
Dimensions: 40.7×20.5×39.5mm
Weight: 45g
Torque (6.0V): 4kg-cm/ Speed (6.0V): :0.20s
Gears: plastic

Inside the box :

• 1/10th BRX.S1 Buggy RTR version with stickered body
• KT2S+ radio system
• 220V AC 500 mAh charger
• 7.4V 2200mAh Li-Po battery
• Instruction manual

Not included :

LR6 (AA) batteries (4 pcs)
R/C specifics tools